Before we begin, make sure the walls are free of dust, you will have trouble applying the decal.
Lay your wall decal onto a hard flat surface with the translucent transfer sheet facing up. Pressing firmly using a credit/debit card to scrape across the decal surface. This will ensure that your wall decal is completely fixed to the transfer sheet. Then, repeat this process, but turn the decal face down so you are now pressing and scraping the squeegee across the white backing paper.
Carefully peel back the white sheet so that the wall decal is left on the translucent transfer sheet and the sticky side is facing out. If parts of the wall decal remain on the white sheet push the sheet back onto the transfer sheet to rub the area for a few seconds to adhere it to the transfer sheet.
Gently place the transfer sheet with your wall decal onto a smooth clean surface in the position desired. Once you have it in the exact position you would like lightly smooth your hand across the surface to semimount the piece. Now, pressing firmly, use the plastic squeegee to rub across the surface of the transfer paper from the center out to ensure removal of any air bubbles.
After a few minutes of rubbing the material, carefully remove the transfer sheet by pulling the sheet away but parallel to the wall. If any part of the wall decal sticks on the sheet push the sheet back onto the wall and rub the area for a few seconds with the squeegee.
Still having trouble? Download our visual instructions here: http://issuu.com/lunaluv/docs/vinylapplicationtips